Cleaning and maintenance of sex dolls

How to clean sex dolls?

These suggestions are specifically for how to clean and maintain TPE sex dolls.

The key to prolonging the life of sex dolls is to keep sex dolls clean and well maintained. To ensure the hygiene and longevity of sex dolls, please only use the following suggestions as a guide.

Basic kit for cleaning doll:

• Comb
• Sulfate-free soap or mild liquid soap.
• Water
• Vaginal douche (provided)
• Soft cloth (ideally microfiber) or sponge
• Dry soft towel or chamois cloth.
• Powder (cornstarch/flour or baby powder)
• Powder brush.
• Mineral baby oil.
• Vaseline./ Petroleum Jelly. 
• Strong absorbent paper towel

How often should I clean the sex doll?

• Please clean the doll before using it for the first time to remove factory residues.
• If the doll does not have a dust-free storage space, it should be cleaned once a month.
• We recommend cleaning the key areas of the sex doll after each use.

General maintenance (depending on usage).

• We recommend oiling TPE dolls at most 3-4 times a year. Do not over-oil.
• Apply a small amount of Vaseline/Vaseline jelly to high-stress areas such as knees, groin and openings.
• Spread corn starch/flour on the doll before long storage.
• Do not use alcohol or silicone based products eg found in lubricants, wipes and perfumes.

5 expert recommendations for the easiest way to clean a sex doll

1. Use male or female condoms during intercourse to maintain lubrication.

2. Buy sex dolls with removable vaginas to facilitate cleaning.

3. For sex dolls with a fixed vagina, please use a fan or insert a tampon into the vagina to help dryness.

4. When using powder or oil, it is best to hang the doll or lay it down.

5. For local cleaning, a small spray bottle is very suitable. Mix water 1:5 with soap.

Blacklist of hazardous cleaning products

1.-alcohol:

• Pure alcohol, such as rubbing alcohol, alcohol diluted with water, and products containing a lot of alcohol, such as baby wipes, disinfectant wipes, sprays and soaps, toy cleaners, etc.
• Alcohol creates micro-cuts (irreparable) and drying effects (porous, cracked and brittle) inside the TPE structure.
• Before using a sex doll, spray perfume only on clothes and/or wigs.
• Do not spray perfume directly on the surface of the doll’s TPE skin.

2.-Solvent:

Various single solvents and solvent compounds, such as mineral essential oils, odorless mineral essential oils, paint thinners, nitro thinners, and products containing solvents, such as alcohol-free baby wipes (including ether and/or chlorine instead of alcohol). They will dissolve the internal molecular structure of TPE and destroy the block copolymer, so they are extremely harmful to TPE. According to the repair manual/video and suggestions provided by the supplier, only use the official repair solvent provided by the supplier for TPE dolls.

3.-Vegetable oil:

• Products containing vegetable oils, such as cream, soap, coconut oil, fruit oil and other shower gels.
• Vegetable oil will seal the surface of the TPE, thereby stopping the necessary respiratory function of the TPE.

4.-Silicone oil:

• Products such as wet condoms (including dimketone) and silicone-based lubricants.
• Silicone oil will affect the TPE structure, making it harder, cracked and brittle.
• The shrinkage properties of TPE will also change.

What product is used for cleaning?

It can be cleaned with shower gel or facial soap. Do not use strong alkali and strong acid detergents, such as 84 disinfectant, detergent, laundry soap, laundry detergent and other corrosive cleaners, including strong disinfectants and detergents.

How to clean sex dolls?

• First use a soft towel to remove excess lubricant or body fluids.
• Remove the vagina (if it is a removable vagina).
•   Remove the wig and clean it separately.
• Wash the vagina or penis in antibacterial warm soapy water and let it dry thoroughly.
• For non-removable dolls-put the doll on the bath towel on the bed, and mix (preferably without sulfate) soap and clean warm water with a spray bottle, gently wipe the skin of the doll with your hands, or wipe with a clean sponge.
• The safest way is to lay the doll on a bath towel, spray with water and then wipe, but if you are confident handling your doll’s weight and enjoy water-play, please see below.
• If you want to take care of the “skeleton”, you can bathe the doll, for example, don’t let the neck or head get too wet. This is to prevent damage to the “skeleton” and potential mold. If you find it easier, you can also cover the metal area with a plastic bag, or make sure to remove your feet (with metal bolts) from the bathtub.
• Wet dolls are slippery and easy to slip.-It is safer for dolls to take a shower on a plastic stool than to stand.
• Do not use abrasive soaps or any other conventional cleaning products.
• Do not use hard sponge or wire brush, otherwise it will cause damage.
• Put the doll on the towel on the bed to dry.
•  Tip: Try to spread the legs of the sex doll and use a small fan to speed up drying.
• Do not place the doll to dry near an open flame or radiator.

How to clean the vagina/anus/mouth?

• To clean any opening, it is recommended to use a water sprayer to spray water into the opening so that the water can flow out of the opening. If you don’t have a sprinkler, you can use a shower hose attachment. Turn down the water pressure and keep the water temperature low.
• Alternatively, you can simply use a damp (soft) cloth and clean it manually with warm soapy water. Make sure to thoroughly clean all areas of the opening.
• You can also clean the openings with your hands or a small sponge during the shower (please refer to the description of the skeleton above)
• Use all drying methods-open the doll’s legs slightly, open the vagina and anus to the air, and dry naturally.
• You can also insert a dry cloth into the vagina/anus/mouth to absorb the remaining water. You can wrap a sponge, dry towel or paper towel on the stick, insert it and pull it out, and repeat it several times.
• But in any case, the interior is still wet after the sponge drying treatment, so it is best to use a normal temperature air pump for further drying.
• Of course, if you choose a removable vagina, everything will be easier. It is very easy to clean and take out/put in. Turn the inside over, wash it with facial soap and water, then dry it for a while, and then Turn it over again, and apply some fresh cornstarch on the outside of the vagina, and then reinsert it into the sex doll.
• Do not separate the doll’s legs too far during the cleaning process, because long stretches may cause strain and damage. Do not use a hair dryer, because if the doll is heated above 40ºC, it may start to melt.
• Once the doll is completely dry, apply a small amount of vaseline to love holes.
• Do not use abrasive soaps or any other harsh chemical cleaning products.

How to clean the face of a sex doll?

• If possible, remove the wig.

prompt:

How to dry sex dolls after cleaning?

Ensuring that the doll is completely dry is important to reduce damage to the doll.

• It is recommended to use petroleum jelly as a protective measure and lubricant in orifices.

How to clean the wig of a sex doll?

Handling, moving and storing sex dolls:

Tips for changing nails:

•  Align the fallen (loose) nail with the nail to be selected. In this way, you can determine which nail matches which finger.
• After selecting the nails, apply a thin and even layer of glue on the bare nail area. First make sure that the area is clean and dry, free of dust or foreign objects.
• Do not over-apply glue, avoid over-applying, so as to avoid overflow.
• Once properly aligned, hold the nail for 5 seconds-do not touch any glue.
• Excess glue is difficult to remove, so it is best to avoid overflow completely. In case the glue overflows, please use a microfiber cloth and hot soapy water to remove the glue immediately.
• To remove the nail, use tweezers, and then gently pull the nail out of the sex doll (with gentle movements to avoid any injury).

Tips for changing eyes:

• Place the doll in the middle position.
• Use one hand to gently separate the eyelids (up and down, not left and right), without touching the eyelashes or make-up.
• With the other hand, disassemble the eye and remove it from the socket.
• Take the new eye out of the packaging.
• Use one hand to pull the eyelids apart and do not touch the eyelashes or make-up.
• Use the other hand to insert the new eye into the slot and adjust it.

Re-correction of loose eyelashes:

• Lay the doll flat, facing up.
• Apply a small amount of glue to paper clips, pins, cocktail sticks or other household “tools” with fine tips. We recommend using cocktail stick.
• Gently pull the eyelashes back and apply glue on the back of the eyelashes (not the doll), and allow to go “tacky” for a moment before pressing on.
• Hold the end of the eyelashes, do not touch the glue, and carefully press it into the place where you want to stick.
•   Hold for 5 seconds, then let go.

Clean sex doll clothes

• One of the biggest problems we hear from customers is dyeing. Both TPE and silicone will easily absorb any color on clothes. Make sure your clothes are washed to minimize the risk of sex dolls being dyed.
• Only use clothes that are unlikely to fade. Before dressing the doll, all clothes must be washed, as this will prevent the sex doll from being stained.
• After you are satisfied with the clothes and materials prepared for the doll, you must ensure that the clothes are dry. If there is excess water or moisture on the clothes, it will stain the baby’s skin.

Expert tips:

• Clothes can help your sex doll become more beautiful. However, when buying clothes, please be alert that the clothes will fade and may leave stains on the sex doll. Please be careful because sex dolls (especially TPE dolls) are easy to get dirty.
• We recommend that you buy white, pink or light-colored clothes for sex dolls. If you want to wear dark clothes for sex dolls, it is best to wash all dark and bright clothes before you dress it on the sex doll.